Breadboard ARM DIP

About 3 years ago, I bought the lpc1768 version of this board.  Recently, I found an error in my soldering of the ground pin!

I have been using it with the Eclipse or Lpxpresso environment NXP still supports for it. 
Then, I found a post from Jay Carlson that involved finally breaking the LPC-Link debugger and getting an LPC1114 DIP ARM on a bare-bones breadboard configuration. 

As you can see, I got the usual blinking LED working he had in his post:

Once again, I had to overcome my lack of soldering skills. Try 1 had no power to the chip. Try 2, no comm. Finally, the 3rd try worked!

I found these helpful:

http://www.lpcware.com/content/nxpfile/sample-code-bundle-lpc11xx-peripherals-using-nxp-lpcxpresso

http://www.digikey.com/product-detail/en/EA-XPR-003/EA-XPR-003-ND/2410099

http://www.digikey.com/product-search/en?pv16=6533&FV=fff40027%2Cfff800cd&k=lpc1114&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25